RCSTEVE SCX30 Performance Link Kit

Designed specifically for the Axial SCX30 platform, the RCS Performance Link Kit features proven RCSTEVE high-clearance geometry with adjustable rod ends for smooth articulation and fine-tuning your setup.

Oversized lower links provide a strong, planted foundation, while reduced-diameter titanium upper links help reduce weight above the axle and provide additional clearance for smooth suspension movement.

Adjustable Link Geometry

Adjustable threaded rod ends allow you to fine-tune link length, axle position, pinion angle, and driveline alignment.

Designed around the stock SCX30 chassis geometry and compatible with a variety of aftermarket chassis. Aftermarket mounting positions may vary, so minor rod-end adjustment may be required for your setup.

O-Ring-Free Pivot Ball Design

RCS rod ends feature an O-ring-free pivot ball design for smooth, free-moving articulation with reduced resistance and binding.

8 Configurations Available

Wheelbase

• Stock Wheelbase

• +6mm Rear Extended Wheelbase

High-Clearance Geometry

• Single-Bend

• Double-Bend

Material

• Full Titanium

• Titanium Uppers + Nickel-Plated Brass Lowers

Full Titanium provides a lightweight, performance-focused setup. Anodizing finishes from the RCS Voltage Series are available for additional charge. Choosing anodizing with Brass Lowers will only anodize the uppers.

Nickel-Plated Brass Lowers add weight down low for a more planted setup while retaining lightweight titanium upper links. The nickel-plated finish provides a clean silver appearance while helping protect the underlying brass from oxidation and tarnishing.

Pre-Assembled

Pre-assembled 8-piece suspension link kit with rod ends and pivot balls installed.

Installation Note

*M1.0 pivot balls are required at the skid plate mounting locations*. Swap to the appropriate M1.0 pivot balls during installation.

Pivot balls can also be removed from the RCS rod ends when using the factory SCX30 ball-stud hardware.

Kit Includes

• 8-Piece Suspension Link Set

• 2 Spare Rod Ends

Complete Your SCX30 Setup

Pair with RCSTEVE SCX30 Steering Links, available separately.

Confirmed Compatibility

• Axial SCX30

• Mofo Cyber Snake

• Flub RC Droplet

Designed around the stock Axial SCX30 chassis and wheelbase. Aftermarket chassis fitment may vary depending on mounting positions and setup.